張希平1，王美由1，高中楠1，趙程2， 吳俊平1

（1. 青島豐東熱處理有限公司，山東 青島 266108 2. 青島科技大學，山東 青島 266061）

摘要：青島豐東熱處理有限公司研發的軟氮化+后氧化復合處理技術（FD-NCO）可以使機械零部件同時具有優良的耐磨性能和耐蝕性能，FD-NCO復合滲層是由十余微米厚的白亮層（ε相）和1~2微米厚的Fe3O4膜構成。試驗結果表明，經過FD-NCO復合處理后的工件鹽霧試驗最高可達1200小時，處理過程無污染，完全可以取代污染嚴重的QPQ技術。

關鍵詞：軟氮化；后氧化；復合處理；應用研究；耐磨；耐蝕

Application researches of the combined treatments of nitrocarburizing and post-oxidizing

Zhang Xi-ping1, Wang Mei-you1, Gao Zhongnan1，Zhao Cheng2, Wu Jun-ping1

(1. Qingdao Fengdong Heat Treatment Co. Ltd., Qingdao 266108, China

2. Qingdao University of Science and Technology, Qingdao 266061, China)

Abstract: The combined treatment technology (FD-NCO) of nitrocarburizing and post-oxidizing was developed by Qingdao Fengdong Heat Treatment Company. The combined treatment can make the mechanical parts with excellent wear resistance and corrosion resistance. The combined layer was composed of more than 10μm bright white layer (ε-phase) and 1~2μm Fe3O4film. Experiment results show that the salt spray test of the parts treated by FD-NCO technology was more than 1200 hours. The FD-NCO technology was non-pollution and can completely replace the polluting QPQ technology.

Key words: Nitrocarburizing; post-oxidizing; combined treatments; application researches; wear resistance; corrosion resistance

上世紀60年代，德國Degussa公司首先發明了鹽浴軟氮化技術（Tenifer工藝），以提高機械零部件的耐磨性能，后來Degussa公司又在此基礎上增加了后氧化工藝，使處理后的機械零部件不僅耐磨，而且還可以大幅度提高零件表面的耐蝕性能，這就是著名的QPQ技術[1]。